ACKNOWLEDGMENT Thanks to Ulrich Raich and Razaq Ijoduola for their contribution of the ASRAB cross assembler. Ulrich Raich and Razaq Ijoduola PS Division CERN CH-1211 Geneva-23 Ulrich dot Raich at cern dot ch
PROCESSOR SPECIFIC DIRECTIVES
The ASRAB assembler is a port of the ASZ80 assembler. This
assembler can process Rabbit 2000/3000 (default), HD64180 (Z180),
and Z80 code. The following processor specific assembler
directives specify which processor to target when processing the
input assembler files.
Format:
.r2k
The .r2k directive enables processing of the Rabbit 2000/3000
specific mnemonics. Mnemonics not associated with the Rabbit
2000/3000 processor will be flagged with an <o> error. Address-
ing modes not supported by the Rabbit 2000/3000 will be flagged
with an <a> error. A synonym of .r2k is .r3k. The default as-
sembler mode is .r2k.
The .r2k directive also selects the Rabbit 2000/3000
specific cycles count output when the -c command line option is
specified.
Format:
.hd64
The .hd64 directive enables processing of the HD64180 (Z180)
specific mnemonics not included in the Z80 instruction set.
Rabbit 2000/3000 mnemonics encountered will be flagged with an
<o> error. Addressing modes not supported by the HD64180 (Z180)
will be flagged with an <a> error. A synonym of .hd64 is .z180.
The .hd64 directive also selects the HD64180/Z180 specific
cycles count output when the -c command line option is speci-
fied.
Format:
.z80
The .z80 directive enables processing of the Z80 specific
mnemonics. HD64180 and Rabbit 2000/3000 specific mnemonics will
be flagged with an <o> error. Addressing modes not supported by
the z80 will be flagged with an <a> error.
The .z80 directive also selects the Z80 specific cycles
count to be output when.
The .__.CPU. Variable
The value of the pre-defined symbol '.__.CPU.' corresponds
to the selected processor type. The default value is 0 which
corresponds to the default processor type. The following table
lists the processor types and associated values for the ASRAB
assembler:
Processor Type .__.CPU. Value
-------------- --------------
.r2k / .r3k 0
.hd64 / .z180 1
.z80 2
The variable '.__.CPU.' is by default defined as local and
will not be output to the created .rel file. The assembler com-
mand line options -g or -a will not cause the local symbol to be
output to the created .rel file.
The assembler .globl directive may be used to change the
variable type to global causing its definition to be output
to the .rel file. The inclusion of the definition of the vari-
able '.__.CPU.' might be a useful means of validating that
seperately assembled files have been compiled for the same pro-
cessor type. The linker will report an error for variables with
multiple non equal definitions.
RABBIT INSTRUCTION SYMBOLS
b Bit select
(000 = bit 0, 001 = bit 1,
010 = bit 2, 011 = bit 3,
100 = bit 4, 101 = bit 5,
110 = bit 6, 111 = bit 7)
cc Condition code select
(00 = NZ, 01 = Z, 10 = NC, 11 = C)
d 8-bit (signed) displacement.
Expressed in two\'s complement.
dd word register select-destination
(00 = BC, 01 = DE, 10 = HL, 11 = SP)
dd' word register select-alternate
(00 = BC', 01 = DE', 10 = HL')
e 8-bit (signed) displacement added to PC.
f condition code select
(000 = NZ, 001 = Z, 010 = NC, 011 = C,
100 = LZ/NV, 101 = LO/V, 110 = P, 111 = M)
m the most significant bits(MSB) of a 16-bit constant
mn 16-bit constant
n 8-bit constant or the least significant bits(LSB)
of a 16-bit constant
r, g byte register select
(000 = B, 001 = C, 010 = D, 011 = E,
100 = H, 101 = L, 111 = A)
ss word register select-source
(00 = BC, 01 = DE, 10 = HL, 11 = SP)
v Restart address select
(010 = 0020h, 011 = 0030h, 100 = 0040h,
101 = 0050h, 111 = 0070h)
x an 8-bit constant to load into the XPC
xx word register select
(00 = BC, 01 = DE, 10 = IX, 11 = SP)
yy word register select
(00 = BC, 01 = DE, 10 = IY, 11 = SP)
zz word register select
(00 = BC, 01 = DE, 10 = HL, 11 = AF)
C - carry bit set
M - sign bit set
NC - carry bit clear
NZ - zero bit clear
P - sign bit clear
PE - parity even
V - overflow bit set
PO - parity odd
NV - overflow bit clear
Z - zero bit set
The terms m, mn, n, and x may all be expressions. The terms b
and v are not allowed to be external references.
RABBIT INSTRUCTION SET
The following list of instructions (with explicit addressing
modes) are available in the Rabbit 2000/3000 assembler mode.
Those instructions denoted by an asterisk (*) are additional in-
structions not available in the HD64180 or Z80 assembler mode.
ADC A,n DEC IX LD A,EIR
ADC A,r DEC IY LD A,IIR
ADC A,(HL) DEC r *LD A,XPC
ADC A,(IX+d) DEC ss LD A,(BC)
ADC A,(IY+d) DEC (HL) LD A,(DE)
ADC HL,ss DEC (IX+d) LD A,(mn)
ADD A,n DEC (IY+d) *LD dd,BC
ADD A,r DJNZ e *LD dd,DE
ADD A,(HL) LD dd,mn
ADD A,(IX+d) EX AF,AF LD dd,(mn)
ADD A,(IY+d) EX DE,HL LD EIR,A
ADD HL,ss EX DE,HL *LD HL,IX
ADD IX,xx EX (SP),HL *LD HL,IY
ADD IY,yy EX (SP),IX *LD HL,(HL+d)
*ADD SP,d EX (SP),IY *LD HL,(IX+d)
*ALTD EXX *LD HL,(IY+d)
*AND HL,DE LD HL,(mn)
*AND IX,DE INC IX *LD HL,(SP+n)
*AND IY,DE INC IY LD IIR,A
AND n INC r *LD IX,HL
AND r INC ss LD IX,mn
AND (HL) INC (HL) LD IX,(mn)
AND (IX+d) INC (IX+d) *LD IX,(SP+n)
AND (IY+d) INC (IY+d) *LD IY,HL
*IOE LD IY,mn
BIT b,r *IOI LD IY,(mn)
BIT b,(HL) *IPRES *LD IY,(SP+n)
BIT b,(IX+d) *IPSET 0 LD r,g
BIT b,(IY+d) *IPSET 1 LD r,n
*BOOL HL *IPSET 2 LD r,(HL)
*BOOL IX *IPSET 3 LD r,(IX+d)
*BOOL IY LD r,(IY+d)
JP f,mn LD SP,HL
CALL mn JP mn LD SP,IX
CCF JP (HL) LD SP,IY
CP n JP (IX) *LD XPC,A
CP r JP (IY) LD (BC),A
CP (HL) JR cc,e LD (DE),A
CP (IX+d) JR e LD (HL),n
CP (IY+d) LD (HL),r
CPL *LCALL x,mn
*LD (HL+d),HL *POP IP SBC A,n
*LD (IX+d),HL POP IX SBC A,r
LD (IX+d),n POP IY SBC A,(HL)
LD (IX+d),r POP zz SBC HL,ss
*LD (IY+d),HL *PUSH IP SBC (IX+d)
LD (IY+d),n PUSH IX SBC (IY+d)
LD (IY+d),r PUSH IY SCF
LD (mn),A PUSH zz SET b,r
LD (mn),HL SET b,(HL)
LD (mn),IX RA SET b,(IX+d)
LD (mn),IY RES b,r SET b,(IY+d)
LD (mn),ss RES b,(HL) SLA r
*LD (SP+n),HL RES b,(IX+d) SLA (HL)
*LD (SP+n),IX RES b,(IY+d) SLA (IX+d)
*LD (SP+n),IY RET SLA (IY+d)
LDD RET f SRA r
LDDR *RETI SRA (HL)
LDI *RL DE SRA (IX+d)
LDIR RL r SRA (IY+d)
*LDP HL,(HL) RL (HL) SRL r
*LDP HL,(IX) RL (IX+d) SRL (HL)
*LDP HL,(IY) RL (IY+d) SRL (IX+d)
*LDP HL,(mn) RLA SRL (IY+d)
*LDP IX,(mn) RLC r SUB n
*LDP IY,(mn) RLC (HL) SUB r
*LDP (HL),HL RLC (IX+d) SUB (HL)
*LDP (IX),HL RLC (IY+d) SUB (IX+d)
*LDP (IY),HL RLCA SUB (IY+d)
*LDP (mn),HL *RR DE
*LDP (mn),IX *RR HL XOR n
*LDP (mn),IY *RR IX XOR r
LJP x,mn *RR IY XOR (HL)
LRET RR r XOR (IX+d)
RR (HL) XOR (IY+d)
*MUL RR (IX+d)
RR (IY+d)
NEG RRC r
NOP RRC (HL)
RRC (IX+d)
*OR HL,DE RRC (IY+d)
*OR IX,DE RRCA
*OR IY,DE RST v
OR n
OR r
OR (HL)
OR (IX+d)
OR (IY+d)
Z80/HD64180 INSTRUCTION SYMBOLS
The following list specifies the format for each Z80/HD64180
addressing mode supported by ASRAB:
#data immediate data
byte or word data
n byte value
rg a byte register
a,b,c,d,e,h,l
rp a register pair
bc,de,hl
(hl) implied addressing or
register indirect addressing
(label) direct addressing
(ix+offset) indexed addressing with
offset(ix) an offset
label call/jmp/jr label
The terms data, n, label, and offset may all be expressions.
Note that not all addressing modes are valid with every in-
struction, refer to the Z80/HD64180 technical data for valid
modes.
Z80/HD64180 INSTRUCTIONS
The following tables list all Z80/HD64180 mnemonics recog-
nized by the ASRAB assembler. The designation [] refers to a
required addressing mode argument.
Inherent Instructions
ccf cpd
cpdr cpi
cpir cpl
daa di
ei exx
halt neg
nop reti
retn rla
rlca rld
rra rrca
rrd scf
Implicit Operand Instructions
adc a,[] adc []
add a,[] add []
and a,[] and []
cp a,[] cp []
dec a,[] dec []
inc a,[] inc []
or a,[] or []
rl a,[] rl []
rlc a,[] rlc []
rr a,[] rr []
rrc a,[] rrc []
sbc a,[] sbc []
sla a,[] sla []
sra a,[] sra []
srl a,[] srl []
sub a,[] sub []
xor a,[] xor []
Load Instruction
ld rg,[] ld [],rg
ld (bc),a ld a,(bc)
ld (de),a ld a,(de)
ld (label),a ld a,(label)
ld (label),rp ld rp,(label)
ld i,a ld r,a
ld a,i ld a,r
ld sp,hl ld sp,ix
ld sp,iy ld rp,#data
ldd lddr
ldi ldir
Call/Return Instructions
call C,label ret C
call M,label ret M
call NC,label ret NC
call NZ,label ret NZ
call P,label ret P
call PE,label ret PE
call PO,label ret PO
call Z,label ret Z
call label ret
Jump and Jump to Subroutine Instructions
jp C,label jp M,label
jp NC,label jp NZ,label
jp P,label jp PE,label
jp PO,label jp Z,label
jp (hl) jp (ix)
jp (iy) jp label
djnz label
jr C,label jr NC,label
jr NZ,label jr Z,label
jr label
Bit Manipulation Instructions
bit n,[]
res n,[]
set n,[]
Interrupt Mode and Reset Instructions
im n
im n
im n
rst n
Input and Output Instructions
in a,(n) in rg,(c)
ind indr
ini inir
out (n),a out (c),rg
outd otdr
outi otir
Register Pair Instructions
add hl,rp add ix,rp
add iy,rp
adc hl,rp sbc hl,rp
ex (sp),hl ex (sp),ix
ex (sp),iy
ex de,hl
ex af,af'
push rp pop rp
HD64180 SPECIFIC INSTRUCTIONS
in0 rg,(n)
out0 (n),rg
otdm otdmr
otim otimr
mlt bc mlt de
mlt hl mlt sp
slp
tst a
tstio #data
... Exit the ASxxxx Documentation
... Home Page