PROCESSOR SPECIFIC DIRECTIVES
The MC68HC(S)08 processor is a superset of the MC6805 proces-
sors. The AS6808 assembler supports the HC08, HCS08, 6805, and
HC05 cores.
.hc08 Directive
Format:
.hc08
The .hc08 directive enables processing of only the HC08 specific
mnemonics. 6805/HC05/HCS08 mnemonics encountered without the
.hc08 directive will be flagged with an <o> error.
The .hc08 directive also selects the HC08 specific cycles
count output when the -c command line option is specified.
.hcs08 Directive
Format:
.hcs08
The .hcs08 directive enables processing of the HCS08 specific
mnemonics.
The .hcs08 directive also selects the HCS08 specific cycles
count to be output.
.6805 Directive
Format:
.6805
The .6805 directive enables processing of only the 6805/HC05
specific mnemonics. HC08/HCS08 mnemonics encountered without
the .hc08/.hcs08 directives will be flagged with an <o> error.
The .6805 directive also selects the MC6805 specific cycles
count to be output.
.hc05 Directive
Format:
.hc05
The .hc05 directive enables processing of only the 6805/HC05
specific mnemonics. HC08/HCS08 mnemonics encountered without
the .hc08/.hcs08 directives will be flagged with an <o> error.
The .hc05 directive also selects the MC68HC05/146805 specific
cycles count to be output.
The .__.CPU. Variable
The value of the pre-defined symbol '.__.CPU.' corresponds to
the selected processor type. The default value is 0 which cor-
responds to the default processor type. The following table
lists the processor types and associated values for the AS6808
assembler:
Processor Type .__.CPU. Value
-------------- --------------
.hc08 0
.hcs08 1
.6805 2
.hc05 3
The variable '.__.CPU.' is by default defined as local and
will not be output to the created .rel file. The assembler com-
mand line options -g or -a will not cause the local symbol to be
output to the created .rel file.
The assembler .globl directive may be used to change the
variable type to global causing its definition to be output to
the .rel file. The inclusion of the definition of the variable
'.__.CPU.' might be a useful means of validating that seperately
assembled files have been compiled for the same processor type.
The linker will report an error for variables with multiple non
equal definitions.
68HC(S)08 REGISTER SET
The following is a list of the 68HC(S)08 registers used
by AS6808:
a - 8-bit accumulator
x - index register <H:X>
s - stack pointer
68HC(S)08 INSTRUCTION SET
The following tables list all 68HC(S)08 mnemonics recognized
by the AS6808 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
format for each addressing mode supported by AS6808:
#data immediate data
byte or word data
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
,x register indexed addressing
zero offset
offset,x register indexed addressing
0 <= offset <= 255 --- byte mode
256 <= offset <= 65535 --- word mode
(an externally defined offset uses the
word mode)
,x+ register indexed addressing
zero offset with post increment
offset,x+ register indexed addressing
unsigned byte offset with post increment
offset,s stack pointer indexed addressing
0 <= offset <= 255 --- byte mode
256 <= offset <= 65535 --- word mode
(an externally defined offset uses the
word mode)
ext extended addressing
label branch label
The terms data, dir, offset, and ext may all be expressions.
Note that not all addressing modes are valid with every in-
struction, refer to the 68HC(S)08 technical data for valid modes.
Control Instructions
clc cli daa div
mul nop nsa psha
pshh pshx pula pulh
pulx rsp rti rts
sec sei stop swi
tap tax tpa tsx
txa txs wait
Bit Manipulation Instructions
brset #data,*dir,label
brclr #data,*dir,label
bset #data,*dir
bclr #data,*dir
Branch Instructions
bra label brn label
bhi label bls label
bcc label bcs label
bne label beq label
bhcc label bhcs label
bpl label bmi label
bmc label bms label
bil label bih label
bsr label bge label
blt label bgt label
ble label
Complex Branch Instructions
cbeqa [],label
cbeqx [],label
cbeq [],label
dbnza label
dbnzx label
dbnz [],label
Read-Modify-Write Instructions
nega negx
neg []
coma comx
com []
lsra lsrx
lsr []
rora rorx
ror []
asra asrx
asr []
asla aslx
asl []
lsla lslx
lsl []
rola rolx
rol []
deca decx
dec []
inca incx
inc []
tsta tstx
tst []
clra clrx
clr [] clrh
aix #data
ais #data
E.2.6 Register\Memory Instructions
sub [] cmp []
sbc [] cpx []
and [] bit []
lda [] sta []
eor [] adc []
ora [] add []
ldx [] stx []
Double Operand Move Instruction
mov [],[]
16-Bit <H:X> Index Register Instructions
cphx []
ldhx []
sthx []
Jump and Jump to Subroutine Instructions
jmp [] jsr []
... Exit the ASxxxx Documentation
... Home Page