The TCP/IP Package software components should be installed as described in the following sections. The ethernet device handler specific to your particular hardware configuration must be copied to the RT-11 system device. The logical name assign- ments used by the package are: 1. TCP: Location of client/server programs and assorted configuration, message, and help files. 2. PAS: Location of password files. 3. ENx: Selected device driver units 0-3. The logical name assignments MAI:, location of mailboxes, HTP:, location of HTTP home directory, and GPH:, location of GO- PHER files, may be used in various command files. The TCP/IP Package for RT-11 executables are found on logical disks RTDSK1.DSK, RTDSK2.DSK, and RTDSK3.DSK. The required device handlers are found on the logical disk DVRDSK.DSK.
Configurations The RT-11 package may be installed in one of the following three configurations: 1) Install All Files on System Device All command files and client/server programs are copied directly to your system disk. Assign SY: to TCP:. This confi- guration puts everything in one place but installs about 90 files (and 2100 blocks) on your system disk. 2) Install Only Command Files on System Device Create a seperate logical disk (assigned as TCP:) for the client/server programs and perhaps seperate logical disks for the password files (assigned as PAS:) and mail boxes (assigned as MAI:). Copy the command files to the system directory. This will install about 50 files (and 50 blocks) on your system device. 3) Install All Files on a Logical Disk Create a seperate logical disk (assigned as TCP:) for the package and perhaps seperate logical disks for the password files (assigned as PAS:) and mail boxes (assigned as MAI:). Copy all the files to the TCP: disk. This configuration re- quires the user to specify the TCP: logical when using any TCP/IP command file or program but removes all files from the system disk. CCL commands may be defined to obviate the need for using TCP:, see the file RTUCL.INS for a complete set of de- finitions using IND command files or RTUCLV.INS for definitions using the VRUN command without command files. Edit the selected file to include only the CCL definitions you wish defined.
Software Components The following annotated list summarizes the software components: 1. TCP/IP Network Server 1. TCPIP.COM TCPIP startup command file 2. TCPIP.SAV TCPIP network server Program 3. TCPIP.CFG TCPIP configuration file 2. Telnet Client 1. TELNET.COM TELNET startup command file 2. TELNET.SAV TELNET client program 3. Remote TELNET Server 1. RTELNT.CML TELNET server startup command line 2. RTELNT.COM TELNET server startup command file 3. RTELNT.SAV TELNET server program 4. RTELNT.MSG TELNET server message file 5. RTELNT.HLP TELNET server help file 4. Remote Telnet Port Server 1. RPTLNT.CML TELNET Port server startup command line 2. RPTLNT.COM TELNET Port server startup command file 3. RPTLNT.SAV TELNET Port server program 4. RPTLNT.MSG TELNET Port server message file 5. RPTLNT.HLP TELNET Port server help file 5. CNCT Client 1. CNCT.COM CNCT startup command file 2. CNCT.SAV CNCT client program 6. Remote CNCT Server 1. RCNCT.CML CNCT server startup command line 2. RCNCT.COM CNCT server startup command file 3. RCNCT.SAV CNCT server program 4. RCNCT.MSG CNCT server message file 5. RCNCT.HLP CNCT server help file 7. Remote CNCT Port Server 1. RPCNCT.CML CNCT Port server startup command line 2. RPCNCT.COM CNCT Port server startup command file 3. RPCNCT.SAV CNCT Port server program 4. RPCNCT.MSG CNCT Port server message file 5. RPCNCT.HLP CNCT Port server help file 8. FTP Client 1. FTP.COM FTP startup command file 2. FTP.SAV FTP client program 3. FTPCMD.TXT FTP command help text 9. FTPL Client 1. FTPL.COM FTPL startup command file 2. FTPL.SAV FTPL client program 10. Remote FTP Server 1. RFTP.CML FTP server startup command line 2. RFTP.COM FTP server startup command file 3. RFTP.SAV FTP server program 4. RFTP.MSG FTP server message file 5. RFTP.HLP FTP server help file 11. MAIL Client 1. MAIL.COM MAIL startup command file 2. MAIL.SAV MAIL client program 3. MAICMD.TXT MAIL command help text 12. MMAIL Client 1. MMAIL.COM MMAIL startup command file 2. MMAIL.SAV MMAIL client program 3. MMACMD.TXT MMAIL command help text 13. POP3 Mail Server 1. RPOP3.CML RPOP3 server startup command line 2. RPOP3.COM RPOP3 server startup command file 3. RPOP3.SAV RPOP3 server program 14. MAILER Task 1. MAILER.CML MAILER task startup command line 2. MAILER.COM MAILER task startup command file 3. MAILER.SAV MAILER task program 15. Remote MAIL Server 1. RSMTP.CML MAIL server startup command line 2. RSMTP.COM MAIL server startup command file 3. RSMTP.SAV MAIL server program 4. RSMTP.HLP MAIL server help file 16. Local Printer Utilities 1. LLPC.COM LLPC local start printer queue 2. LLPQ.COM LLPQ local printer queue status 3. LLPR.COM LLPR local print command 4. LLPRM.COM LLPRM local remove print job 5. LLPQRM.SAV LLPxx local printer control program 17. Remote LPD Server 1. RLPD.CML RLPD server startup commnad line 2. RLDP.COM RLPD server startup command file 3. RLPD.SAV RLPD server program 18. Printer Daemon 1. LPRINT.CML LPRINT task startup command line 2. LPRINT.COM LPRINT task startup command file 3. LPRINT.SAV LPRINT task program 4. LPDQRM.CFG LPRINT configuration file 19. Remote Printer Utilities 1. LPC.COM LPC local start printer queue 2. LPQ.COM LPQ local printer queue status 3. LPR.COM LPR local print command 4. LPRM.COM LPRM local remove print job 5. LPQRM.SAV LPxx local printer control program 20. Remote Binary File Printing 1. NTSND.COM NTSND client startup command file 2. NTSND.SAV NTSND client program 21. Remote HTTP Web Server 1. RHTTP.CML RHTTP server startup command line 2. RHTTP.COM RHTTP server startup command file 3. RHTTP.SAV RHTTP server program 22. Remote Gopher Server 1. RGOPH.CML RGOPH server startup commnad line 2. RGOPH.COM RGOPH server startup command file 3. RGOPH.SAV RGOPH server program 4. RGOPH.CFG RGOPH server configuration list 23. Remote Authorization Server 1. RAUTH.CML RAUTH server startup command line 2. RAUTH.COM RAUTH server startup command file 3. RAUTH.SAV RAUTH server program 24. Port Monitor Program 1. PMON.COM PMON startup command file 2. PMON.SAV PMON program 25. Password and Authorization Files 1. PASWRD.COM Password startup command file 2. PASWRD.SAV Password program 3. PASWRD.FIL Password and authorization data file 26. Client/Server Monitor 1. SKTMON.COM Monitor startup command file 2. SKTMON.SAV Monitor program 27. Subdirectory Utilities 1. LCD.COM Change directory command file 2. LDEL.COM Delete file command file 3. LDIR.COM List directory command file 4. LLS.COM List directory command file 5. LMKDIR.COM Make directory command file 6. LPRO.COM Protect file command file 7. LRENAM.COM Rename file command file 8. LRMDIR.COM Delete Subdirectory command file 9. LUNP.COM Unprotect file command file 10. UTIL.SAV Utilities program 28. Subdirectory Summary Utility 1. LDISKS.COM Subdirectory summary command file 2. RFTHLP.COM Generate RFTP.HLP command file 3. LDISKS.SAV Subdirectory summary program file 29. Miscellaneous Files 1. ABRTCP.SAV Abort all Client/Server programs 2. ABRTJB.COM Abort Client/Server Job command file 3. ABRTJB.SAV Abort Client/Server Job program 4. REMOVE.COM Remove all Client/Server global regions 5. DELAY2.SAV Programmed 2 Second Delay
Installation in Detail Complete the hardware installation as described in the chapter titled Hardware Installation. Under RT-11 the most convenient installation is: 1. Create RTTCP.DSK as TCP:, a logical disk for the TCP/IP files 2. Create PASWRD.DSK as PAS:, a logical disk for the password files 3. Optionally Create MAIL.DSK[nnn] as MAI:, a logical disk for the MAIL directory 4. Optionally Create HTTP.DSK[nnn] as HTP:, a logical disk for the HTTP home directory 5. Optionally Create GOPHER.DSK[nnn] as GPH:, a logical disk for the GOPHER home directory NOTE The MAIL, HTTP, and GOPHER directories are needed only if you are going to use the mail, http, or gopher servers. The size of the MAI:, GPH:, and HTP: logical disks are what- ever is needed. 6. Copy the contents of the distribution disks RTDSK1, RTDSK2, and RTDSK3 to TCP:. 7. Verify that your RT-11 mapped system was sysgened to include timer support. If not, then perform a system generation or rebuild the device handlers to your re- quirements. 8. Copy and rename the appropriate device handler from the logical disk DVDSK1.DSK or DVDSK2.DSK to SY:. (See the chapter on device handlers for more information on selecting the appropriate device handler.) 9. Edit the file TCP:RTUCL.INS or TCP:RTUCLV.INS to in- clude the CCL commands you want and install these com- mands. 10. Edit the file TCP:TCPIP.RUN to mount TCP:, PAS:, [MAI:, HTP:, and GPH:], load the appropriate device handler and assign units 0-3 of the device handler to EN0-3, and start the selected programs. Copy TCP:TCPIP.RUN to SY:. 11. Add the line '$@SY:TCPIP.RUN' to your startup command file. 12. Copy PASWRD.SAV and PASWRD.FIL to PAS:. 13. Update the password file. The password file contains an anonymous account which you will need to update or delete. If you delete the anonymous account then add at least one valid account for initial testing with remote FTP enabled. 14. Edit the file TCP:TCPIP.CFG for your configuration. Your machine's name and IP address are required and the specification of a name server and gateway may be required for your network. 15. Edit the files TCP:*.CML to contain the proper command line arguments for jobs started by SY:TCPIP.RUN. 16. Reboot your RT-11 system. Verify that the job TCPIP is running. (If the job did not start then check that SY:TCPIP.RUN has TCP: defined correctly, the confi- guration file path is correct, file TCPIP.CFG is cor- rect, and that the selected device driver was loaded. Try starting the TCPIP server from the console using the IND control file TCP:TCPIP.COM with the appropriate command line arguments and see what errors the program gives. 17. Verify that another networked computer can communicate with your machine by doing a 'ping'. Don't know what a ping is? Skip this step. (verifies that TCPIP is able to respond to data sent over the Ethernet wire) 18. Attempt to Telnet or FTP to a local computer using only the IP number of that computer. (verifies connections are possible) 19. Attempt to Telnet or FTP to a local computer using the computer's name. The computer's name and IP address must not be in the TCPIP.CFG file. (verifies that the name server entry is correct) 20. Attempt to Telnet or FTP to a machine not on your local network. If you use the machine's name then the name server must be working or the machine's name and IP number must be in the configurataion file TCP:TCPIP.CFG. (verifies that the gateway entry is correct) 21. If the RFTP job is running then attempt to FTP to your computer from some other networked machine using your machine's IP address. If your machine's name has not been added to the name server you must use the IP number. (verifies that the command line file TCP:RFTP.CML is correct and that password checking is working) Essentially your installation is now complete. You only need to update the password file to specify user/password informa- tion, access rights, and default FTP and MAIL directories. In- dividual program configuration information is contained in the chapter titled Program Options.
... Exit TCP/IP Documentation
... Home Page
Last Updated: June 2008